Gates and Railings Home | About Gates and Railings | Our Gates | Our Railings | Gallery of Gates and Railings | Contact Gates and Railings
Gate and Railings
Wrought Iron Welcome to gates and Railings Railings and Gates Wrought Iron Railings
Wrought Iron Gates Gates and Railings Home About Gates and Railings Our Gates Our Railings Gallery of Gates and Railings Contact Gates and Railings
Gates and Railings
 

Design your own Gates and Railings

Terms and Conditions

Please ensure all provided measurements are accurate, as we are unable to provide a refund for incorrect sizes ordered. The width of the total expanse should be provided and, from this, depending on whether you have specified posts/brackets, the size of the gate/railings 'panel' is calculated. We work with a +/- 5mm tolerance, so please take this into consideration when measuring for your gates and railings. If you have any queries regarding measuring up for your gates or railings, please contact us.

Generally, we use 12, 16 and 20mm diameter insert bars, depending on the size of the gate/railings panel. If you have any preferrence, please contact us.

The above 'Design Your Own' feature is intended to provide a graphical representation of the finished article and is not 100% accurate or to scale. Occasionally some decorative features may not be immediately available and a suitable alternative will be sourced. If you require a specific design, please contact us before ordering your gates or railings.

If you have specified brackets or posts with your gates/ralings, appropriate fixings for attaching to regular brick work will be supplied. If you require alterantive fixings, please contact us.

 
Mobile Site | Installation Instructions | Frequently Asked Questions | Terms and Conditions | Accessibility | Links | Site Map | Contact Us